KMZ Rubin-1 37-80mm f/2.8

In October 2018, I reviewed the KMZ Zenit-E, one of the most well known and identifiable cameras to ever come out of the former Soviet Union.  Millions of Zenits were produced from 1952 – 1996 and many of them were the Zenit-E.

When they were first released, the Zenit used a modified M39 lens mount that was later changed to the the “universal” M42 screw mount used by Pentacon, Pentax, and a zillion other companies.  There are literally thousands of different M42 lenses made in nearly every focal length and configuration imaginable and they’re all compatible with most Zenits.

The reason I say “most” is that from 1964 to 1968, KMZ, the factory where Zenits were made, released a new series of Zenit cameras known as the Zenit 4, 5, and 6 which other than the name, shared nothing with their screw mount counterparts.  These new Zenits were loosely based on the Voigtländer Bessamatic and came with a behind the lens leaf shutter and shared the Bessamatic’s DKL style bayonet lens mount.

The Zenit 4, 5, and 6 are all basically the same camera with the only difference being the Zenit-5 had a rechargeable battery operated motorized film advance, and the Zenit-6 came with a different standard lens.  Both the Zenits 4 and 5 came standard with a Vega-3 50mm f/2.8 lens, but the Zenit 6 came with an all new zoom lens called the Rubin-1.  Loosely based on the Voigtländer Zoomar, originally designed by Dr. Frank G. Back as a motion picture lens, the Zoomar is widely considered to be the first successful zoom lens for 35mm.

The Zenit-6 came exclusively with the Rubin-1 in DKL mount.  It was the first Soviet built zoom lens.

I say “loosely based” on the Zoomar as the two lenses are quite different.  For one, the physical construction of the lens is different.  Both lenses have 14 elements, but the Zoomar is constructed in 5 groups, and the Rubin in 11.  Another difference is that the zoom range is not exactly the same.  The Zoomar has a slightly wider range of 36mm to 82mm, whereas the Rubin is 37mm to 80mm.  How you zoom the lens is different too.  The Zoomar has a “push to zoom” ring, whereas the Rubin uses a more traditional twisting motion.

Unlike the Zoomar which uses a ‘push to zoom’ ring, the Rubin twists like most zoom lenses do.

I lack a strong understanding of how lenses are constructed, so maybe there’s more internal similarities than the external specs might suggest, but I don’t think it’s accurate to consider the Rubin a copy of the Zoomar.  Nevertheless, both the Zoomar and Rubin are very early examples of a zoom lens for 35mm, but with a Soviet version of the DKL mount, it’s not a lens that’s easily adapted to other cameras.

Luckily, Soviet collectors are a resourceful bunch, and modifying the Rubin’s mount and replacing it with a standard M42 screw mount was commonly done, allowing the lens to be used on a variety of Zenits and other similar cameras.

The Rubin-1 was adapted to M42 by some previous owner, allowing it to be used on many other cameras like the Zenit E.

I picked up this M42 modified Rubin-1 when my friend Vlad from ussrphoto.com alerted me to one from a collector in Russia.  Vlad has contacts in former Soviet countries who will often look for things for him and build up a large shipment of stuff, and send it all at the same time using a local courier to save on shipping.  Since he has to wait for an entire shipment to come, it took several months before I was able to pick up the lens from him, but when I did, my first observation was…

Holy cow, this thing is heavy!  If you consider the Zenit to be a pretty solid hunk of metal, when mounted together, the weight of the lens and camera is 1793 grams, making it the heaviest camera and lens combination in my entire collection.  Even without the weight of the Zenit hanging off the back of the lens, by itself, the Rubin-1 is 1094 grams of solid metal and glass.

Everything about this lens is big, from it’s weight, to it’s 82mm front filter ring.  This example came with a Hoya HMC Super UV filter on it which was a nice bonus, especially considering that filter had a list price of $67 when it was sold (it’s no longer available).

The chrome metal ring closes to the lens mount is part of the M42 conversion, allowing you to manually select f/stops.

Using the M42 modified Rubin-1 is a little tricky because the original DKL mount did not have any method for stopping down the iris on the lens itself.  The DKL mount as used on the original Zenit 4, 5, and 6, Kodak Retina Reflex, Voigtländer Bessamatic and others, has the aperture control on the lens mount, not the lens.  Selecting a different f/stop on those cameras simply moves a pin in the lens that causes the iris to open and close.

When the Rubin is modified to M42 mount, the ability to select f/stops must be added to the lens.  On this example, a metal ring near the base of the lens mount needed to be added.  Whoever did this modification did not bother to include f/stop numbers, rather just etched a couple different lines at the various positions where the lens is at f/2.8 through f/16 (I assume).  Since the marks are not labeled and there’s no click stops, it can be a bit tricky to know exactly which f/stop you’ve selected.  While shooting, I just assumed that whatever the halfway position I had it at, was around f/8 to f/11.

I really wanted to test the Rubin with a Soviet era film but didn’t have any at the time I was motivated to take the camera and lens out, so I chose some slightly expired Kodak Tri-X 400.  I figured the medium amount of grain typical of that film, combined with the late winter days I would shoot the camera and lens might pair well.

As recently as the 1970s and 80s, zoom lenses were generally considered inferior to primes due to the larger number of moving elements within the lens.  The Rubin has 14 elements compared to a Zeiss Tessar which has 4 elements, so the increase in glass also can have a negative affect on sharpness and increase the chances of refraction and other anomalies.  If manufacturers struggled with this in the 1980s, how would a Soviet built copy of a lens first designed in the 1950s fare?

Every one of the images above show a noticeable softness across the entire image that gets worse near the edges.  The Zenit-E has a pretty dark viewfinder to begin with, and mounting a slower zoom lens only makes it worse, so I did struggle to see focus in a few instances.  I noticed that softness increased at the longer end of the lens.  At it’s widest, sharpness is good, but as I zoomed in, you can clearly see that the lens struggles.

Although not originally built for the Zenit-E the Rubin looks at home when mounted to it.

Vignetting was surprisingly keep to a minimum.  Vintage wide angle lenses often show a pronounced darkness near the corners, and in shots taken at 37mm, I really didn’t notice any significant vignetting which suggests that coverage of the lens is far greater than a 24x36mm image.

Perhaps the worst characteristic I noticed with the Rubin is a low contrast “haze” in nearly every image.  I put haze in parenthesis as looking through the lens, I didn’t see any of the typical haze you see in older lenses, but I believe that with the complexity of the Rubin’s 14 elements, there’s a lot of light bouncing around in there lowering contrast.  It’s certainly not bad, and can be improved in post processing, but certainly affects the “pop” you expect of a quality lens.

It’s easy to be critical of these images looking at them on a high resolution LCD computer monitor, but it’s important to remember that the original users of these lenses shot them on modest quality black and white film and likely never had them printed on anything larger than 5×7.

While none of my observations would have likely been deal breakers for a 1960s Soviet photographer who would have originally purchased this lens, there is a limit of how much detail you can see in a lens using film, so I naturally wondered how this lens would perform when adapted to digital.  Using an M42 to Fuji X-mount adapter, I mounted the lens to my Fujifilm X-T20 digital mirrorless.

Having the benefit of a pixel peeping 24.3 megapixel digital sensor, we can more clearly see what the Rubin-1 is capable of.  For starters, many of my observations with the black and white film images above are still here.  The lens is still pretty soft at the longer end.  The image of the tree is from about a quarter of a mile away and loss of sharpness is prevalent throughout the entire frame.  Vignetting is kept to a minimum, but edge softness is an issue in nearly every image.

With these being my first color images shot through the Rubin, it is clear that the softness around the edges seen in the black and white images also have huge amounts of chromatic aberrations.  Controlling the different wavelengths in the color spectrum is a challenge for any lens builder and is one that the Rubin doesn’t come close to mastering.

The deep blue coating on the Rubin has held up well and allowed for accurate and faithful colors when I shot it digitally.

On the plus side though, colors are rendered very naturally.  The deep blue coating on the front and rear elements (I am unsure if the inner elements are coated too) are doing a good job at keeping colors vibrant without any noticeable tint.  Whatever coating KMZ used has held up well over the years, not showing any yellowing typical of mid century lens like those made by Asahi (Pentax) and Kodak.

Out of focus details in the flower images are also extremely smooth and pleasing to my eye.  I wouldn’t go as far as to declare the Rubin as a “bokeh-master”, but for those of you looking for creamy backgrounds to your closeups, this lens does an excellent job of it.  Of all the negative things I can say about the Rubin, it’s the out of focus details that will bring me back to this lens again.  In hindsight, the softness of the lens might make it ideal as a portrait lens as people tend to like soft focus details on people’s faces.

The Rubin-1 is a historically significant lens with some pretty big flaws, but it’s still a lot of fun to shoot.

The Rubin-1 is a fascinating lens, not just because of it’s heft and size, but it’s historical significance as being the first Soviet zoom lens, being based on the also historically significant Zoomar, and the fact that it can be adapted to use on M42 cameras makes this something worth checking out if you have the opportunity.

There are significant optical flaws in this lens compared to a more modern one, but that’s not the point.  The look you get, especially with it’s creamy out of focus details, makes it a winner in my book.  Reviewing an optically perfect lens is boring as there’s nothing to talk about.  Reviewing a lens like the Rubin-1 where there’s so much to talk about is much more interesting.

If you can live with a flawed, but interesting, and extremely heavy lens, the Rubin-1 might be the lens for you!

3 Comments

  1. Really interesting article as always Mike. That lens is fascinating. I hadn’t even heard of it till now. Is that the old Zenit I sent you getting the workout with the Rubin.? If so, glad you took it off the shelf if only to use with this strange but cool looking lens. Hope you and the family are well and staying safe.

    1. Yes Paul, this is the same Zenit you graciously donated to me a while back. Since that review, I’ve shot it a couple of times and while it is a rudimentary camera, I have always enjoyed it. With this Rubin-1 on it, it truly has become a unique photographic tool!

  2. Really appreciated this review, as I’ve seen some good words about this lens from our Ukranian analog friends. The yellow / gold color of older Takumar lenses, particularly early examples of the 50/1.4, are a result of the thorium-rich glass in some of the elements, not of the coating … or so I understand from Pentax Forums.

Leave a Reply to Roger B. Cancel reply